As an Amazon Associate we earn from qualifying purchases. When you buy through our links, we may earn a commission at no extra cost to you. Prices and availability are subject to change on Amazon. Affiliate disclosure ›
Finding the right edger depends on your yard size, power preference, and the surfaces you need to tackle. This category covers lawn edgers across every major type — gas, corded electric, cordless battery-powered, and manual blade edgers — along with specialty tools like cement edgers and paint edgers. Each review breaks down real-world performance, cutting depth, ease of use, and value so you can weigh the trade-offs honestly. Gas edgers deliver the most power for large properties but require more maintenance. Cordless models offer freedom of movement with improving battery life, while corded electric edgers suit smaller yards where a power outlet is nearby. Combination trimmer-edgers can save money and storage space, though dedicated edgers typically produce cleaner lines. Whether you are a weekend homeowner or a landscaping enthusiast, the guides here are designed to match the right tool to your specific situation rather than push a single winner.
Changing a trimmer line is a simple DIY task once you know your head type. This guide walks you through bump-feed, tap-advance, and fixed-line heads , covering the right line gauge, winding direction, reassembly, and troubleshooting.
Learn how to change grass trimmer line safely and correctly. This guide covers bump-feed, fixed-line, automatic, and pre-wound spool heads, with step-by-step instructions, line gauge tips, and troubleshooting advice.
Changing the line on a weed wacker is a simple 5-10 minute task. First, ensure the trimmer is powered off and disconnect the spark plug or remove the battery. Remove the trimmer head, pull out the old spool, and discard the remaining string. Cut new line to the manual's specified length, wind it onto the spool in the direction of the arrows, and thread the ends through the eyelets before reassembling.
Learn exactly how to put wire (trimmer line) in a weed wacker, whether you have a bump feed or fixed line head. This guide covers line measurement, threading, winding direction, and troubleshooting common installation problems.
Learn how to install weed wacker string on any trimmer, including bump-feed, fixed-line, and quick-load heads. Step-by-step instructions, winding tips, and troubleshooting advice for common string problems.
Learn how to replace strimmer line with this step-by-step guide. We cover safety, removing the spool, winding new line for both bump-feed and manual wind heads, and troubleshooting common problems.
Replacing weed wacker string is a simple DIY task once you know your trimmer head type and the correct winding technique. This guide walks you through removing the old line, choosing the right gauge, and reloading bump feed, fixed-line, and quick-load heads safely.
To string a Craftsman weed eater with a two-hole trimmer head, start by turning it off, removing the battery or disconnecting the spark plug, and setting the trimmer on a flat surface. Remove the spool from the head, cut a fresh length of trimmer line of the diameter recommended in your owner's manual, and insert one end through the first hole in the spool and the other end through the second hole, pulling the line through so both sides are roughly equal. Wind both ends in the direction of the arrows shown on the spool, keeping the windings tight and even, and tuck the free ends into the notches to hold them during reassembly. Reinstall the spool into the head, snap the cover back on, then pull both line ends to release them from the notches and thread them outward through the two exit eyelets on the head. Because Craftsman models vary, always confirm line diameter and length against your specific model's manual before beginning.
Learn how to use an edger trimmer safely and effectively. This guide covers safety precautions, step-by-step operating instructions for both string trimmers and dedicated edgers, tips for clean edges, and basic maintenance.
The best weed wacker depends on your yard size, power preference, and budget. For most homeowners, a battery-powered model offers the best balance of convenience and performance, while gas trimmers provide maximum power for large properties.
