Quick Answer
Higher PCH fan speed marginally lowers nearby NVMe temperature via stray airflow. Effect stays minor, usually one to three degrees Celsius. Dedicated SSD heatsinks and direct case fans drop temperatures far more. Log drive controller temperatures under sustained write load before and after altering fan profile to verify cooling impact.
Pros
- High 64GB capacity across two 32GB UDIMM modules
- Operates at up to 5600MHz with downclocking support
- Low standard operating voltage of 1.1V
- Dual-rank (2Rx8) non-ECC desktop configuration
Cons
- Requires compatible DDR5-supported motherboard and CPU
- Lacks built-in RGB lighting for aesthetic customization
Pros
- E-ATX board for Intel Core Ultra Series 2 on LGA 1851
- Listed M.2 layout includes onboard and expander slots
- DDR5 listed up to 9200+ MT/s OC on four DIMM slots
- 3.99-inch LCD for hardware monitoring, per listing
- Thunderbolt 5 accessory card listed for rear ports
Cons
- Thunderbolt 5 relies on an accessory card, per listing
- E-ATX size and 6.8-pound weight may limit case options
Pros
- 32GB DDR4 RAM and 1TB PCIe M.2 NVMe SSD (listed)
- Intel Core i5-12400F, 6 cores and 12 threads
- Wired keyboard and mouse combo included
- Windows 11 Home pre-installed, per listing
- RJ-45 Gigabit Ethernet and dual-monitor ports listed
Cons
- Entry-level GT 1030 graphics limit demanding workloads
- Listing shows no customer reviews yet
Does Increasing Motherboard PCH Fan Speed Lower NVMe Temperatures?
Short answer: raising the chipset (PCH) fan speed has a small, indirect effect on NVMe temperatures. It matters mainly on boards where an M.2 slot sits directly beneath or beside the chipset heatsink. In most builds, the chipset fan is a 40 mm class fan moving only a few cubic feet per minute across a heatsink. It is not an SSD cooling device. This guide covers the thermal mechanisms, a repeatable test method, better cooling options, and the cases where changing the fan curve is justified.
How Chipset Fans Affect Nearby Parts
Chipset fans exist because some platform controller hubs dissipate enough power to need active cooling in a restricted enclosure. Manufacturer documentation lists the AMD X570 chipset at roughly 11-15 W TDP, while recent Intel desktop PCHs (Z690/Z790 class) are specified around 6 W. A 15 W part under a small finned heatsink typically needs forced air, and the fan is usually a 12 V DC, 4-pin PWM unit drawing about 0.1-0.3 A. PWM control runs at the standard 25 kHz carrier, and tachometer-reported speeds usually fall between 2,000 and 6,000 RPM.
Three heat-transfer paths link the chipset fan to a neighboring NVMe drive:
- Convective airflow: A 40 mm fan at 5,000 RP
For related maintenance and equipment benchmarks, review our technical guides on best gaming pcs, examine multitasking gaming desktops, and compare streaming pc builds. You can also reference our analyses on vr desktop performance and high-performance gaming pcs. For industry engineering standards, consult IEEE Computer Society benchmarks.
