How to String a Craftsman Weed Eater with Two Holes? (Step-by-Step Guide)
To string a Craftsman weed eater with a two-hole trimmer head, start by turning it off, removing the battery or disconnecting the spark plug, and setting the trimmer on a flat surface. Remove the spool from the head, cut a fresh length of trimmer line of the diameter recommended in your owner's manual, and insert one end through the first hole in the spool and the other end through the second hole, pulling the line through so both sides are roughly equal. Wind both ends in the direction of the arrows shown on the spool, keeping the windings tight and even, and tuck the free ends into the notches to hold them during reassembly. Reinstall the spool into the head, snap the cover back on, then pull both line ends to release them from the notches and thread them outward through the two exit eyelets on the head. Because Craftsman models vary, always confirm line diameter and length against your specific model's manual before beginning.
