As an Amazon Associate we earn from qualifying purchases. When you buy through our links, we may earn a commission at no extra cost to you. Prices and availability are subject to change on Amazon. Affiliate disclosure ›
Learn how to change oil on a Husqvarna lawn mower step by step — covering walk-behind, riding, and zero-turn models. Includes correct oil type, capacity, drain methods, filter replacement, and the EZ-change drain system.
Learn how to clean a Briggs and Stratton lawn mower carburetor with this complete step-by-step guide. Covers tools, safety, disassembly, jet cleaning, reassembly, and prevention tips to keep your mower running strong.
Learn how to clean a lawn mower air filter step by step — including foam and paper filter methods, fuel and oil filter checks, and when to replace instead of clean. Covers walk-behind and riding mowers from brands like Briggs & Stratton, Honda, and Husqvarna.
Learn how to clean a Briggs & Stratton carburetor on a lawn mower step by step — from shutting off the fuel and removing the carburetor to disassembling the float bowl, main jet, and needle valve, clearing clogged passages with carburetor cleaner, and reinstalling everything correctly.
Learn how to check a lawn mower spark plug with this step-by-step guide covering visual inspection, gap measurement, live spark testing, and fouling diagnosis to keep your mower running smoothly all season long.
Engine surging, hard starting, or rough idle after winter storage usually points to a dirty carburetor. This guide walks you through diagnosing the problem, choosing between a quick in-situ spray clean and a full disassembly, and confirming the engine runs smoothly afterward — with Briggs & Stratton-specific callouts for common series including the 450e, 500e, 675ex, and 725ex.
Learn how to clean a Craftsman lawn mower carburetor with this step-by-step guide covering both quick spray-clean and full disassembly methods for walk-behind and riding mowers.
Learn how to safely drain a lawn mower gas tank using three proven methods — running the engine dry, using a hand siphon pump, or disconnecting the fuel line — plus essential safety precautions, storage tips, and proper gasoline disposal guidelines.
To get gas out of a lawn mower, use a hand siphon pump or fuel transfer pump to draw fuel from the tank into an approved fuel container — fastest and safest for most mowers. For small push-mower tanks, a turkey baster or fluid extractor works well. Alternatively, run the mower until the tank and carburetor are empty, but only if the fuel is fresh. Always work outdoors, away from ignition sources, and store removed fuel in a certified gas container.
Learn how to clean a Craftsman lawn mower carburetor with two proven methods: a quick in-place spray cleaning for mild surging, and a full removal-and-disassembly deep clean for stalling or hard starting. Covers Briggs & Stratton, Kohler, and Tecumseh engines, plus the tools, safety steps, and reassembly tips you need to finish the job without a mechanic.
