Is a Zero Turn Mower Good for a Small Yard?
A compact zero-turn can help a tight, obstacle-filled lawn, but layout, storage, access, and terrain often matter more than yard size.
How to Use a Lawn Sweeper
Attach or position the sweeper, set brush or tine height so it lifts debris without digging, make slow overlapping passes, and empty the hopper before it packs full.
How to Use an Electric Mower
Learn how to inspect, start, mow with, and store a corded or cordless electric mower safely, including when to stop and get help.
How Much to Charge for Lawn Mowing Per Square Foot? (2026)
Industry standard lawn mowing rates typically range from $0.01 to $0.03 per square foot, though actual pricing varies significantly based on location, property condition, terrain difficulty, and market competition. Learn how to calculate competitive rates, compare pricing models, and adjust for regional markets.
How to Use an Edger Tool
Learn how to use a lawn or landscape edger safely: gear, checks, shallow first passes, a straight guide-wheel cut, shutdown, and common mistakes.
How Wide Is a Lawn Mower?
Lawn mower width is not one size. Learn cutting width versus overall width, typical ranges by mower type, and how to measure for gates, sheds, and storage.
How to Use an Edging Tool
Learn how to identify a lawn or garden edger, check safety, and cut a clean vertical border without tearing turf or damaging the tool.
What Is a 3 in 1 Mower Blade?
A 3-in-1 mower blade is a multipurpose lawn-mower blade meant to support mulching, bagging, and side discharge when the deck is set up with the matching plug, bag, or chute. Here is how the blade, lift, and deck work together.
How Much Does It Cost to Rent a Lawn Mower?
Residential lawn mower rentals typically cost $20–80 per day depending on mower type and location. Push mowers rent for $20–40/day, while riding mowers range $50–150/day. Learn pricing by equipment type, rental duration, and how to determine if renting or buying makes sense for your lawn care needs.
How to Wind Strimmer Line
Isolate the tool, follow the spool arrows, wind compatible nylon line taut in the marked direction, thread the eyelets and check the feed before you cut.