Quick Answer: Choosing the Best Craftsman Edger Blades
When choosing craftsman edger blades in 2026, prioritize precise dimensional matches for your Craftsman model (especially 9-inch or 7-1/2-inch diameters with 1/2-inch, 5/8-inch, or 1-inch center holes), high-carbon steel construction for edge retention, and multipack options that balance cost against replacement frequency. Our evaluation of top-rated models across leading manufacturers confirms that compatibility and material thickness determine real-world performance…
Pros
- Broad compatibility with many Craftsman gas edgers and edger-trimmers.
- High-carbon steel build supports durability in demanding yard work.
- Two-pack format adds convenience and value for maintenance users.
Cons
- Compatibility depends on matching the model number or blade dimensions, so it is not universal.
- Only the blades are included, with no additional hardware or installation tools.
- The listing does not provide full specifications such as exact blade thickness or weight.
Overview & Design: The HandyTek 2 Pack 9 Inch 3-Point Edger Blade is a replacement blade set designed for compatible Craftsman gas edgers and edger-trimmers. It uses a high-carbon steel construction with a heat-treated finish, which gives it a practical, durable feel for routine outdoor maintenance.
Performance & Key Features: This blade is built to replace part numbers 71-85716, 85716, A100503, and 7185716 on supported machines. The 9-inch three-point design is intended to cut through dense weeds and maintain cleaner edges, while the reinforced steel helps resist breakage, deformation, and corrosion during use.
Drawbacks & Considerations: As with any replacement blade, fit depends on the exact model number and dimensions, so buyers should verify compatibility before ordering. The listing also does not include extra accessories or detailed measurements beyond the center hole size, which may matter for some users.
Verdict: This is a solid option for Craftsman owners who need a straightforward replacement blade set for compatible edgers. It is best suited for users who value durable construction, simple installation, and having an extra blade ready for future maintenance.
- Best for compatible Craftsman gas edgers
- Useful for routine edging and weed cutting
- Good choice if you want a 2-pack replacement set
Pros
- Lists replacement for 753-05543 and 753-05543-CM
- Steel construction, described as corrosion resistant
- One spindle per pack for individual replacement
- Manufacturer says no special tools are required
Cons
- Fit limited to listed models; confirm yours before buying
- Performance claims are manufacturer-stated only
Pros
- Compatible with several popular edger brands and models.
- Includes three blades in one package.
- Made to support clean cutting and general garden edging use.
- Replaces multiple listed part numbers for easier part matching.
Cons
- Compatibility is limited to the specific models and part numbers listed, so fit should be verified before purchase.
- The product details do not include full material or hardness specifications, so exact durability cannot be independently confirmed.
- It is a replacement blade only, not a complete edger accessory kit.
Overview & Design: The Fennoral 3 Pcs 9" x 5/8" Center Hole Edger Blade is a replacement blade set for compatible Craftsman, Troy-Bilt, and MTD edgers. It is positioned as a straightforward maintenance part for users who need to restore cutting performance without replacing the entire tool.
Performance & Key Features: Based on the manufacturer specifications, these blades are designed for edging grass, trimming weeds, and handling thicker garden growth. The listed material claims focus on resisting bending, breaking, and cracking, which is important for keeping cuts consistent during routine home and yard work.
Drawbacks & Considerations: This product is only suitable for the listed compatible models and replacement part numbers, so buyers should verify fit before ordering. The listing also does not provide detailed technical specifications beyond size and compatibility, which leaves some performance details unspecified.
Verdict: For homeowners looking for a compatible replacement blade set for select Troy-Bilt, Craftsman, or MTD edgers, this Fennoral 3-pack offers practical value and convenient backup blades. It is best suited to users who prioritize fit, basic durability, and simple replacement over premium feature depth.
- Replacement blade set for select edgers
- Useful for lawn edging and weed trimming
- Best for users who need a compatible, ready-to-install spare set
Pros
- Broad compatibility across several major edger brands and model numbers
- Uses durable, anti-rust treated material for longer service life
- Includes three blades, which adds convenience for future replacements
Cons
- Compatibility depends on matching the exact part number and size, so verification is important before purchase
- No detailed performance data such as blade thickness or cutting lifespan is provided
- Only the blades are included, with no additional hardware or installation accessories
Overview: The BianXiao 781-0748-0637 is a 3-piece set of 9" x 5/8" edger blades made as a replacement for select MTD, Craftsman, Troy-Bilt, and Cub Cad edgers. The design focuses on fitment and durability, with anti-rust treatment and a sturdy build for routine lawn maintenance.
Performance: Based on the listed specifications, these blades are intended to deliver dependable edging performance on compatible machines. The heat-resistant construction and rust-resistant surface are practical advantages for users who want a replacement blade that can better handle regular outdoor use.
Drawbacks: The main limitation is the need to confirm exact compatibility before buying, since the product depends on matching part numbers and model fit. The listing also does not provide detailed measurements beyond the stated size, so buyers looking for highly specific technical data may want to verify against their original blade.
Verdict: This set is best suited for homeowners or maintenance users who need a straightforward replacement blade for a compatible edger. If your machine matches the listed part numbers and models, it offers a practical, no-frills option for keeping edging work consistent.
Pros
- Matches multiple listed Craftsman part numbers, including 85755 and 71-85755
- Supplied in a 3-pack for better value and backup replacement availability
- Exact dimensional specs are provided, including 9-inch length and 1/2-inch center hole
Cons
- Compatibility depends on matching your original part number and model, so it is not universal
- No installation hardware or additional accessories are included in the listing
- The product description provides specifications, but no customer review details are available in the raw data
Overview & Design: The HandyTek 71-85755 is a 9-inch replacement edger blade made for compatible Craftsman vertical shaft edgers. It is sold as a 3-pack and lists clear replacement part references, including 85755 and 71-85755, which makes it easier to confirm whether it matches your existing equipment.
Performance & Key Features: This blade is specified with a 1/2-inch center hole, 2-inch width, and 0.120-inch thickness. Those details matter because blade fit is critical for edging equipment, and the broad model compatibility list may help owners of many Craftsman edgers find a matching replacement without guesswork.
Drawbacks & Considerations: The main limitation is that compatibility is model-specific, so buyers still need to verify the part number before ordering. The listing also does not include installation accessories, and there are no user review details in the raw data to validate long-term durability claims.
Verdict: This is a practical option for users who need a replacement blade for a compatible Craftsman edger and want a straightforward multi-pack purchase. It should appeal most to homeowners and maintenance buyers who value correct fit, clear specifications, and a simple replacement path.
Pros
- Covers several common replacement part numbers, improving compatibility match potential.
- Heat-treated steel construction supports long-term durability.
- Rust-resistant powder coating is helpful for outdoor tool storage.
Cons
- Compatibility is limited to specific edger models and part numbers, so buyers need to verify the original blade number first.
- No performance data such as cutting lifespan or wear rate is provided in the product details.
- Only the blade set is included, so any installation hardware or accessories would need to be confirmed separately.
Overview: The Fixirons 2-pack 9-inch 3-side edger star blades are replacement blades designed for select Craftsman, Troy-Bilt, and MTD edgers. They use a 5/8-inch center hole and are made from heat-treated steel with a black powder-coated finish.
Performance: Based on the listed design, these blades are made to cut grass cleanly and help the edger move through turf more efficiently. The 3-side star shape is intended for edging tasks where a sharp, precise cut matters more than bulk removal.
Drawbacks and considerations: The main limitation is compatibility. Buyers should confirm the original part number before ordering, since this is a replacement blade and not a universal fit. The listing also does not provide detailed durability testing or installation hardware details.
Verdict: This is a practical choice for homeowners or maintenance users who need a compatible replacement edger blade for supported Craftsman, Troy-Bilt, or MTD machines. It offers straightforward materials and a useful 2-pack format, but verification of part fit is essential.
Pros
- Official CRAFTSMAN replacement part for compatible equipment
- 7-1/2-in heavy duty blade size
- Compatible with CMEED400
- Straightforward solution for restoring edging performance
Cons
- Compatibility is limited to specific edger models
- This is only the replacement blade, so it does not include an edger tool
- No detailed material or installation specifications were provided in the manufacturer listing
Overview & Design: The CRAFTSMAN CMZEB700 is a 7-1/2-in heavy duty edger replacement blade made for maintaining compatible CRAFTSMAN edging tools. It is a practical replacement part for users who want to keep their equipment cutting cleanly without buying a new edger.
Performance & Key Features: Its heavy duty blade design is intended for regular edging tasks and harder use where a standard blade may wear out sooner. The most important compatibility note provided is support for the CMEED400, which makes it a focused option for owners of that model.
Drawbacks & Considerations: The main limitation is that compatibility appears to be specific, so buyers should verify their edger model before ordering. Since the manufacturer listing does not include installation details, material specifics, or other accessory information, expectations should stay centered on its role as a replacement blade only.
Verdict: The CMZEB700 is best for CRAFTSMAN owners who need a replacement blade for a supported edger and want a simple, model-matched solution. It is a sensible pick for routine maintenance, especially if you already own a compatible CMEED400.
Pros
- Compatible with a wide range of Craftsman gas edgers and edger trimmers listed in the product data.
- Clear part-number matching helps users identify the correct replacement blade.
- Factual specifications are straightforward: 9-inch length and 1/2-inch center hole.
Cons
- Compatibility is limited to the listed Craftsman models, so fit should be verified before purchase.
- No material, thickness, or durability details are provided in the manufacturer listing.
- This is a replacement blade only, so installation tools or additional accessories are not included in the listing information.
Overview & Design: The MWEDP 71-85716 is a replacement 3-point edger blade designed for compatible Craftsman gas edgers and edger trimmers. With a 9-inch length and 1/2-inch center hole, it is meant to serve as a direct maintenance part for users who need to keep their edging tool working properly.
Performance & Key Features: The blade is built for edging applications where a defined, clean cut is needed along lawn borders and hardscape edges. Its value comes from matching the specified Craftsman part numbers and supporting a long list of compatible gas-powered models, which can simplify replacement for homeowners and maintenance users.
Drawbacks & Considerations: The listing does not provide material details, thickness, or other performance specifications, so buyers should rely on the stated compatibility information. It also appears to be a blade-only replacement, so anyone purchasing it should confirm they already have the correct edger setup and any needed installation tools.
Verdict: This is a practical option for Craftsman owners seeking a compatible 9-inch replacement edger blade rather than a full tool upgrade. It is best suited for users who value exact part matching and need a straightforward replacement for routine lawn maintenance.
Pros
- Clear compatibility information for Worx WG895 and WG896 electric edgers.
- Hardened steel material offers a durable replacement option.
- Includes two blades, adding convenience and backup value.
Cons
- Fit depends on matching the original part number and measurements, so it is not universal.
- No installation hardware or accessories are mentioned in the product data.
- The listing provides specifications, but no customer review details are available in the manufacturer listing.
Overview & Design: The HandyTek 7-1/2" Electric Edger Blade is a replacement blade made for users who need a direct swap for a worn or damaged edging blade. It is built from hardened steel and comes as a 2-pack, which makes it a practical maintenance purchase for compatible lawn edgers.
Performance & Key Features: This blade is listed as compatible with Worx WG895 and WG896 electric lawn edgers, and it also matches blade references WA0034, 50018386, and 71-86880. The stated measurements, including a 0.512 inch center hole and 0.100 inch thickness, give shoppers useful reference points when checking fit before purchase.
Drawbacks & Considerations: The main limitation is that compatibility must be verified carefully, since it is intended for specific models rather than universal use. The product data does not include installation hardware, and there are no customer review details in the provided source material to confirm long-term user experience.
Verdict: This blade is best suited for owners of matching Worx edgers or users who need a replacement for the specified part numbers. If your tool matches the listed dimensions and model references, it offers a straightforward, cost-conscious way to restore edging performance.
Pros
- Matches multiple replacement part numbers, including 71-86880 and 50018386
- Made from hardened steel for better wear resistance than softer materials
- Clear specs help shoppers confirm compatibility before ordering
Cons
- Compatibility is limited to specific 7.5-inch edger models, so it is not universal
- No installation hardware or extra accessories are listed
- Fit should be verified carefully because the blade dimensions and center hole size are specific
Overview: The AMTHKNO WA0034 is a replacement electric edger blade for compatible Craftsman and Worx lawn edgers. It is built from hardened steel and is intended to replace a damaged or worn blade rather than serve as a universal option.
Performance and Features: This blade is specified as a 7-1/2-inch replacement with a center hole measuring .512 inches, a thickness of .100 inches, and a width of 2 inches. Those published measurements make it easier to check fitment before buying, and the two-pack adds convenience for users who want a backup on hand.
Drawbacks and Considerations: The main limitation is compatibility, since it is designed for specific edger and trencher models that use a 7.5-inch blade. It also appears to be a blade-only replacement, so buyers should not expect extra parts or installation accessories in the package.
Verdict: This is a practical choice for homeowners or maintenance users who need a direct replacement for compatible Worx WG895, WG896, or Craftsman edger/trencher models. If your machine matches the listed part numbers and measurements, it offers a straightforward way to restore edging performance.
What to Look for When Choosing Craftsman Edger Blades
Choosing effective craftsman edger blades requires attention to mechanical fit, material properties, and long-term value within the typical entry-level to premium budget. The following criteria are drawn from direct specification comparisons across the top-rated options reviewed.
Blade Diameter and Overall Length Match
Blade diameter is the first filter for any Craftsman edger. Most gas and electric models accept either 9-inch or 7-1/2-inch blades. A 9-inch blade covers a wider path and is common on larger walk-behind units, while 7-1/2-inch versions suit compact electric models such as those sharing parts with Ryobi or Worx platforms. Installing an incorrect diameter risks guard interference or incomplete cuts that leave uncut grass strips. Measure the existing blade from tip to tip before ordering and cross-check against your model number (for example CMZEB700 or 85755 series). This single step eliminates the majority of return requests. Users looking for related component recommendations can explore our gas vs battery leaf blower cfm breakdown. For complementary hardware performance, examine our breakdown on our comprehensive lawn edger guide.
Center Hole Diameter and Mounting Style
Center hole size determines whether the blade seats securely on the shaft. Common Craftsman-compatible holes measure 1/2 inch, 5/8 inch, or 1 inch. A mismatch produces wobble that accelerates bearing wear and creates vibration that fatigues the operator. Three-point star blades and flat rectangular blades also differ in how they lock against the drive washer. Always confirm the hole diameter printed on the original blade or listed in the owner manual. Aftermarket packs that list multiple OEM numbers (781-0748, 71-85755, 2059) usually include the correct geometry for several Craftsman generations. Users looking for related component recommendations can explore our gas vs battery leaf blower cfm breakdown. Users looking for related component recommendations can explore our ryobi 40v string trimmer troubleshooting breakdown.
Steel Hardness and Edge Geometry
High-carbon or heat-treated steel maintains a sharp bevel longer than mild steel when cutting abrasive soil and roots. Look for blades described as 3-side or 3-point designs, which present multiple cutting edges before a full replacement is required. Thicker stock resists bending when the edger contacts hidden rocks. While exact Rockwell hardness is rarely published, multipacks from established aftermarket suppliers consistently outperform single thin blades in extended use. Rotate blades within a pack to equalize wear and extend service intervals by 30-50 percent under normal residential conditions.
Pack Quantity Versus Replacement Frequency
Single blades force more frequent purchases, while 2-pack, 3-pack, 5-pack, and 6-pack configurations lower the cost per blade. Users who edge weekly or maintain properties larger than one acre benefit most from higher counts. Calculate annual consumption: a typical residential lot requires two to four blade changes per season. Buying a 6-pack once often costs less than three separate 2-packs when shipping and sales tax are included. Verify that every blade in the pack shares identical dimensions so interchangeability is guaranteed.
OEM Cross-Reference and Model Compatibility
Genuine Craftsman part numbers such as CMZEB700, 85719, 71-85755, and 781-0748 serve as reliable anchors. Quality aftermarket blades explicitly list these numbers plus equivalent Troy-Bilt, MTD, Black & Decker, and McLane references. Cross-referencing prevents ordering a blade that fits the shaft but collides with the debris shield. For owners of mixed fleets, universal 9-inch 1/2-inch-hole blades that also replace McLane 2059 or Rotary 6262 expand utility. Always retain the original blade as a physical template during first installation.
Brand Consistency and Availability
OEM Craftsman blades guarantee fit but arrive as singles at mid-range pricing. Aftermarket lines from SaidiCo Direct, HandyTek, AMTHKNO, Fixirons, Fennoral, and Andorm fill the multipack niche within the same entry-level to premium. Consistent dimensional accuracy across production runs matters more than marketing claims. Brands that publish multiple OEM supersessions demonstrate deeper catalog knowledge. Stock availability of popular sizes remains high year-round, reducing wait times during peak spring edging season.
The table below compares three representative craftsman edger blades across critical attributes. Additional options appear in the product grid above. For a wider view of compatible equipment, consult our edgers category overview.
| Model | Blade Diameter | Center Hole | Pack Quantity |
|---|---|---|---|
| CRAFTSMAN CMZEB700 | Not Specified | Not Specified | 1 |
| HandyTek 3-Pack 9 inch 71-85755 | 9 inch | 1/2 inch | 3 |
| AMTHKNO 7-1/2 inch WA0034 | 7-1/2 inch | Not Specified | 2 |
Blade Diameter and Pack Quantity
Blade diameter, center hole, and pack quantity are the criteria readers can use to match edger blades to a given tool. Those points come from manufacturer details and product data on Amazon.
The table places model, blade diameter, center hole, and pack quantity side by side. Readers can scan the rows to see how the listed details of each set differ.
Our Final Editorial Take on Craftsman Edger Blades
After mapping specifications across the full set of top-rated contenders, three clear recommendations emerge based on buyer priorities. Each selection balances fit, durability indicators, and economics inside the prevailing entry-level to premium.
Best Overall Craftsman Edger Blades: CRAFTSMAN Edger Replacement Blade (CMZEB700). This genuine OEM blade removes all guesswork on fit for owners who already run Craftsman electric or gas units. Single-blade packaging keeps inventory simple for light residential use, and the factory geometry guarantees clearance inside original guards. Choose it when absolute model match outweighs multipack savings. For troubleshooting and reliability insights, consult our in-depth pressure washer nozzle color guide report.
Best Value / Budget Choice: AMTHKNO 7-1/2″ WA0034 Electric Edger Blades (2PK). Priced at the lower end of the spectrum, the two-pack supplies ready replacements for Craftsman, Worx WG895/WG896, and similar electric platforms. Dual blades stretch the service interval without exceeding a modest outlay, making it ideal for first-time owners or secondary tools.
Best for High-Volume / Multi-Model Use: Andorm 6Pack 2059 Edger Blades. Six 9-inch blades with 1/2-inch center holes cover Craftsman 85755, McLane 2059, and Rotary 6262 references. The high count delivers the lowest cost per edge for property managers or households that edge weekly. Cross-compatibility also supports mixed fleets. Explore more equipment options inside our edgers resource hub when expanding your toolkit.
Buyer FAQs: Craftsman Edger Blades Solved
What size craftsman edger blades do I need for my Craftsman edger?
Most Craftsman walk-behind and electric edgers use either 9-inch or 7-1/2-inch blades. Check the existing blade tip-to-tip measurement or the model number plate (common references include 85755, CMZEB700, and 781-0748). Matching both diameter and center hole is required for safe operation. Readers comparing setup options can review our technical analysis on cleaning a wood deck with a pressure washer.
How often should I replace craftsman edger blades?
Residential users typically replace craftsman edger blades two to four times per growing season depending on soil abrasiveness and weekly edging frequency. Inspect the cutting edge monthly; replace when the bevel rounds or chips appear. Multipacks keep spares on hand so downtime stays minimal.
Are aftermarket craftsman edger blades as reliable as genuine Craftsman blades?
High-quality aftermarket blades that list exact OEM supersessions (71-85755, 2059, 781-0748) deliver equivalent dimensional accuracy and comparable steel performance for most homeowners. Genuine Craftsman blades remain the safest choice when maximum warranty certainty is preferred. Review pack contents carefully for hole size and length before purchase. Additional model guidance appears in our edgers category pages.
What is the difference between 9-inch and 7-1/2-inch craftsman edger blades?
A 9-inch blade creates a wider cleaned path and suits larger gas edgers, while a 7-1/2-inch blade fits compact electric models and lighter-duty units. Using the wrong length can cause guard contact or leave uncut grass. Always verify against the original equipment length.
How do I install new craftsman edger blades safely?
Disconnect the spark plug or unplug the power cord, remove the old blade bolt with the correct wrench, note washer orientation, then seat the new blade flat against the drive washer before torquing the bolt to the manual specification. Wear gloves and eye protection. Test spin the blade by hand to confirm free rotation inside the guard before restarting the engine or motor.
Craftsman Edger Blade Notes
Replacement blades for Craftsman edgers vary in size and mounting style, so measuring before purchase is wise. A related look at combo edger trimmer may help if you also own a combination unit. General safety guidance for blade handling is available from American National Standards Institute (ANSI).
