As an Amazon Associate we earn from qualifying purchases. When you buy through our links, we may earn a commission at no extra cost to you. Prices and availability are subject to change on Amazon. Affiliate disclosure ›
To check spark plugs on a lawn mower, disconnect the spark plug wire, remove the plug with a socket wrench, and inspect the electrode and insulator for wear, carbon buildup, or damage. Check the gap with a feeler gauge and replace the plug if it is worn, fouled, or cracked.
Learn to safely adjust belt tension on your riding lawn mower by locating the tensioner, loosening or releasing it, repositioning the belt, and re-tightening to achieve proper deflection. Follow these step-by-step instructions for both spring-loaded and bolt-adjustable tensioners.
Learn the correct procedure to clean a lawn mower spark plug, including when cleaning is worthwhile versus when replacement is the better choice.
Discover the primary uses of reciprocating saws, including demolition, cutting wood and metal, plunge cuts, and working in tight spaces.
To adjust a lawn mower carburetor, locate the idle speed screw and idle mixture screw, then make small quarter-turn adjustments while the engine runs. Turn the mixture screw to find the smoothest idle, and adjust the idle speed to the manufacturer's recommended RPM. Always consult your mower's manual, as exact procedures vary by model.
Learn the correct way to sharpen a chainsaw, covering the tools, angles, technique, and verification steps needed for safe and efficient cutting.
Learn how to reline a weed eater with this step-by-step guide covering spool removal, winding new trimmer line, reassembly, and common mistakes to avoid.
A reciprocating saw (recip saw) is used for demolition, rough cutting, and plunge cuts in wood, metal, plaster, and other materials, especially in tight or awkward spaces. Its push-pull blade action and interchangeable blades make it versatile for many cutting tasks.
To put line on a weed eater, first disconnect the spark plug or battery for safety, remove the spool from the trimmer head, wind the line evenly, and reassemble the bump feed mechanism.
A rake features a long handle and a head with tines, but its appearance varies by type. This guide describes the typical structure, common variations, sizes, and materials to help you recognize any rake at a glance.
