As an Amazon Associate we earn from qualifying purchases. When you buy through our links, we may earn a commission at no extra cost to you. Prices and availability are subject to change on Amazon. Affiliate disclosure ›
The Consumer Smart blog is where you will find in-depth smart product reviews, buying guides, and ownership advice. Each article examines durability, long-term value, and software support so you can make a confident purchase decision whether you are buying for the first time or replacing a device that has reached the end of its life.
Switch the trimmer off, open a typical bump-feed head, wind new line with the molded arrows, thread the eyelets, and reassemble. Head type and line size vary, so follow the marks on your spool and the owner’s manual.
Match your head type and line diameter, isolate power, then wind or insert the cutting line the way the spool or housing is designed. This guide covers bump-feed, quick-load, automatic-feed, and fixed-line heads, plus why line fails to advance.
Shut the tool down, match the head type and line size, then wind or lock fresh string so both sides feed evenly. This guide covers bump-feed, easy-load, and fixed-line weed wacker heads.
Park, immobilize, and isolate spark before you go near a riding-mower deck. Then support the machine, lock each blade, and loosen the spindle fastener—checking for reverse-thread bolts and following the owner’s manual when hardware or access differs.
Reload a strimmer by fitting a pre-wound spool or rewinding nylon line, then threading the eyelets. Isolate power first and match the line size on the head.
Stop a Stihl string trimmer, lock the drive shaft, and unscrew the cutting head only after you confirm thread direction and fastener style for your model.
Yes, most modern riding lawn mowers equipped with gasoline engines have alternators. They generate electricity to recharge the battery while the engine runs, powering the starter motor, ignition system, and lights. However, some older models use generators instead, and battery-only electric mowers don't require alternators.
Reload a string trimmer by isolating power, identifying the head type, installing the correct line, winding or locking it as designed, then testing feed with the guard on.
Isolate power, identify whether you have a bump-feed, auto-feed, or fixed-line head, then install a matching spool or rewind line in the marked direction so the cutter feeds again.
Reloading weed wacker string means putting new cutting line in the trimmer head. Identify the head type, disconnect power, match the line size, then rewind, swap a spool, or lock in short pieces.
