How Do You Use a Bissell Little Green Carpet Cleaner? (Step-by-Step Guide)

How Do You Use a Bissell Little Green Carpet Cleaner?

To use a Bissell Little Green carpet cleaner, assemble the machine, fill the clean water tank with warm water and Bissell cleaning formula, attach the appropriate nozzle for your surface, power on the unit, spray the solution onto the stain, scrub with the brush, and then squeeze the trigger to extract the dirty water. After cleaning, empty the dirty water tank, rinse all components, and allow them to air-dry before storage.

Bissell Little Green Parts and Quick-Start Checklist

Before you begin cleaning, familiarize yourself with the machine’s components and gather all necessary supplies. The Bissell Little Green is a portable spot cleaner designed for targeted stains on carpets, upholstery, and vehicle interiors.

• Key Components: Clean water tank, dirty water tank, flexible hose, spray trigger, brush nozzle, and upholstery tool.
• Gather Supplies: Bissell Little Green machine, recommended Bissell cleaning formula, warm water, clean towels, and a small bucket for emptying dirty water.

Ensure both tanks are clean and properly seated on the machine before proceeding. Check that the hose and nozzle attachments are securely connected.

How to Fill the Clean Water Tank with Water and Cleaning Solution

Properly filling the clean water tank is crucial for effective cleaning and to prevent damage to the machine.

1. Remove the Tank: Lift the clean water tank off the machine.
2. Add Warm Water: Fill the tank with warm tap water. Do not use boiling or excessively hot water, as this can damage the tank or internal components.
3. Add Cleaning Formula: Pour in the recommended amount of Bissell cleaning formula. The exact ratio is typically found on the formula bottle or in your machine’s manual. Using non-Bissell solutions may cause excess foam or damage.
4. Reseat the Tank: Securely place the filled tank back onto the machine until it clicks into place.

Important: Never overfill the tank. Leave a small amount of space at the top to prevent spills.

How to Choose and Attach the Right Nozzle

Selecting the correct nozzle ensures optimal cleaning for different surfaces.

• Brush Nozzle: Use this for carpets and rugs. The bristles help agitate and lift dirt from carpet fibers.
• Upholstery/Tool Nozzle: Use the wider or specialized upholstery tool for fabric furniture, car seats, and other delicate surfaces. This tool provides a gentler, more focused suction.

To attach a nozzle, simply push it onto the end of the hose until it locks securely. Always ensure a tight fit to maintain suction power.

How to Spray, Scrub, and Extract Stains

This is the core cleaning process. Follow these steps for effective stain removal:

1. Position the Nozzle: Hold the nozzle about an inch above the stained area.
2. Spray the Solution: Squeeze the spray trigger to apply cleaning solution directly onto the stain. Lightly saturate the area without over-wetting.
3. Let it Dwell (Optional): For tough stains, allow the solution to sit for 1-3 minutes to break down the soil. Do not let it dry.
4. Scrub the Area: Use the brush on the nozzle to gently scrub the stain in a back-and-forth motion. This helps work the solution into the fibers.
5. Extract the Dirty Water: Release the spray trigger and press it again (or use the suction switch, depending on your model) to activate extraction. Slowly pull the nozzle across the wet area to suck up the dirty water. Repeat until the area appears clean and the extracted water runs clear.

Pro Tip: Work from the outside of the stain inward to prevent spreading.

How to Empty and Rinse the Dirty Water Tank

Proper post-cleaning care prevents odors and maintains machine performance.

1. Remove the Tank: Carefully detach the dirty water tank from the machine.
2. Empty the Contents: Pour the dirty water into a sink or toilet. Do not pour it down a drain with a garbage disposal.
3. Rinse Thoroughly: Rinse the dirty water tank with clean water to remove any residue. Do the same for the nozzle and hose.
4. Air-Dry: Leave the tank, nozzle, and hose open to air-dry completely before reassembling or storing.

After-Use Maintenance and Storage

Follow these steps to keep your Bissell Little Green in top condition:

• Rinse All Parts: After each use, rinse the clean water tank, dirty water tank, nozzle, and hose with clean water.
• Air-Dry Completely: Allow all components to dry fully to prevent mold and mildew growth.
• Store Properly: Store the machine in a cool, dry place. Keep the tanks detached and the hose loosely coiled to prevent kinks.
• Regular Cleaning: Periodically wipe down the machine’s exterior with a damp cloth.

Frequently Asked Questions

Can I use other cleaning solutions in my Bissell Little Green?

It is strongly recommended to use only Bissell-formulated cleaning solutions. Other products may create excessive foam, leave residue, or damage the machine’s internal components. Always follow the dilution instructions on the Bissell formula bottle.

How do I know when the area is clean after extracting?

You’ll know the area is clean when the water being extracted through the nozzle appears clear or nearly clear. Additionally, the carpet or upholstery should look visibly cleaner and feel less soapy to the touch.

What should I do if the machine loses suction?

Loss of suction can be caused by a full dirty water tank, a clogged nozzle, or a kinked hose. First, empty the dirty water tank. Then, check the nozzle and hose for blockages and ensure all connections are secure.

How often should I clean the Bissell Little Green itself?

You should rinse the tanks and nozzle after every use. Perform a more thorough cleaning, including wiping down the machine and checking for any buildup, on a monthly basis or after particularly messy cleaning jobs.